PET G - Polyethylene Terephtalate Glycol
Mechanical properties
Properties
Value
Density
1.18 - 1.28 g/cm³
Tensile strength
50 MPa
Tensile strength
32 MPa
Flexibility modulus
1.8 - 2.1 GPa
Elongation
-
Elongation
100% +
Yield
Break
Toughness at low temp
40 J/m
Condition
Break
Toughness at ambient temp
160 J/m
Chemical properties
Notched (izod impact)
Notched (izod impact)
Condition
1.18 - 1.22 g/cm³
Yield
Break
-
Elongation
Impact resistance
40 MPa
-
Value
Properties
Value
10N 50 °C/h
Yield
Break
105 kJ/m2
Chemical properties
Condition
84°C
98°C
1.8 MPa
10N 50 °C/h
92°C
Heat deflection temperature
75°C
Vicat softening temperature
89°C
52 MPa
85°C
Value
8%
Yield
Poor resistance to acetone, oils and grasses
Very good resistance to diluted acid and alkalis
Very good resistance to water, acids, bases, alcohols
Discription:
Condition
1.8 MPa
50N 50 °C/h
50N 50 °C/h
Medium resistance against water, acetone, oils, greases, car fluids, ozone
Very good resistance to water, acids, bases, alcohols
Very good resistance to diluted acid and alkalis
This material is optimal for applications with long-term load. It has higher wear resistance, heat distortion temperature, hardness and chemical resistance.
Polyethy: Polyethylene is classified as a homopolymer due to the fact that it is made from repeated units of one single type of molecule, ethylene
Chlorinated: chlorine content from 34 to 44%
Glycol: alcohol with two hydroxyl groups on adjacent carbon atoms
Optimizing with additives: For any given material, additives like glass fibers/carbon fibers are used in different percentage to ensure better mechanical, chemical, thermal and electrical properties.
Send an inquiry with information about the product you need so our team can pick the best option for additive and give you technical data.
Note: The difference between the statistics in the properties are influenced by the part dimentions and overall structure! Different color additives with specific chemical compositions that affect the properties of the part, the quality of the print, or the dimentional accuracy!
Polyethylene terephthalate glycol, commonly known as PETG or PET-G, is a thermoplastic polyester that provides significant chemical resistance, durability, and excellent formability for manufacturing.
Polyethylene: Polyethylene is classified as a homopolymer due to the fact that it is made from repeated units of one single type of molecule, ethylene
Therephtalate: ester of terephthalic acid.
Glycol: alcohol with two hydroxyl groups on adjacent carbon atoms
Optimizing with additives: For any given material, additives like glass fibers/carbon fibers are used in different percentage to ensure better mechanical, chemical, thermal and electrical properties.
Send an inquiry with information about the product you need so our team can pick the best option for additive and give you technical data.
Note: The difference between the statistics in the properties are influenced by the part dimentions and overall structure! Different color additives with specific chemical compositions that affect the properties of the part, the quality of the print, or the dimentional accuracy!
CPE - Chlorinated polyethylene
Mechanical properties
Properties
Density
Tensile strength
Tensile strength
Flexibility modulus
Elongation
Properties
Heat deflection temperature
Vicat softening temperature
Discription:
PET CF - Polyethylene Terephthalate / 15%CF
Mechanical properties
Properties
Density
Tensile strength
Tensile strength
Flexibility modulus
Elongation
Properties
Heat deflection temperature
Vicat softening temperature
Value
1.14 - 1.17 g/cm³
70 MPa
48 MPa
3%
96,9 MPa
Condition
Elongation
Impact strength
-
-
Value
89°C
112°C
103°C
Yield
Break
Yield
Break
Chemical properties
Condition
1.8 MPa
10N 50 °C/h
50N 50 °C/h
Very good Thermal resistance
Very good resistance to water, acids, bases, alcohols
Very good resistance to diluted acid and alkalis
Discription:
PET-CF is a blend of tough PET and carbon fiber. Carbon fiber improves hardness and mechanical strength, while still help maintain the low warping and shrinkage of ordinary PET. PET-CF has excellent high temperature resistance. It has excellent strength, heat resistance, dimensional stability and low moisture absorption.
Polyethylene: Polyethylene is classified as a homopolymer due to the fact that it is made from repeated units of one single type of molecule, ethylene
Therephtalate: ester of terephthalic acid.
Carbon fibers 15%: Increased temperature resistance and stiffness
Optimizing with additives: For any given material, additives like glass fibers/carbon fibers are used in different percentage to ensure better mechanical, chemical, thermal and electrical properties.
Send an inquiry with information about the product you need so our team can pick the best option for additive and give you technical data.
Note: The difference between the statistics in the properties are influenced by the part dimentions and overall structure! Different color additives with specific chemical compositions that affect the properties of the part, the quality of the print, or the dimentional accuracy!